Single overcenter valve, VBCD SE A CC , 40 L/min, G 3/8"

Overcenter valves are used where there is vital importance in the system. VBCD SE A CC series are ideal when other models can not operate properly. If the control valve is closed center, this valve will be a good choice.

  • Max. Flow Rate: 40 L/min
  • Max. Pressure: 350 bar
  • Pilot Ratio: 1:4.5
  • Ports: G 3/8"
  • Serie: VBCD SE A CC
  • Standard Pressure Setting: 320 bar
  • Availability: 100+
  • Brand: Hydropack
  • SKU: O VBCD 3/8 SE-A CC
Availability: 100+
€46.00

SINGLE OVERCENTER VALVE FOR CLOSED CENTER

VBCD 3/8 SE A CC | V0391

Overcenter valves have great importance in hydraulic systems and have following features:

Load holding: The overcenter valve prevents the movement of a load when the directional valve is in the neutral position, permitting the use of open center directional valves and negating leakage past the spool of closed center directional valves.

Load control: The overcenter valve prevents the actuator running ahead of the pump due to the load-induced energy, thereby eliminating cavitation in the actuator and loss of control.

Load safety: In the case of hose failure, an overcenter valve mounted onto or into a cylinder will prevent uncontrolled movement of the load. When a cylinder is used in a boom, as in a crane, then hose failure protection is vital as the loss of load control could cause damage to people or property.

These valves are used where there is vital importance in the system.

VBCD SE A CC series are ideal when other models can not operate properly. If the control valve is closed center, this valve will be a good choice. Standard pressure setting is 320 bar.

Specification

Serie
VBCD SE A CC
Max. Flow Rate
40 L/min
Ports
G 3/8"
Pilot Ratio
1:4.5
Max. Pressure
350 bar
Standard Pressure Setting
320 bar

Documents

Technical Catalogue
Please log in to post a comment.